Comeo FTC-06

Face Recognition and Temperature Measurement Terminal

FTC-06 is a kind of access control device integrated with temperature screening function. It can fast take skin-surface temperature and upload abnormal temperature event to the center, which can be widely applied in multiple scenarios, such as enterprises, stations, dwellings, factories, schools, campus and so on.

Product Features

  • Thermal Imaging Temperature Sensor,Resolution 120×160。
  • Temperature Range:30 °C to 45 °C (86 °F to 113 °F), Measurement accuracy:0.1 ° C,Measurement Deviation:± 0.5 °C。
  • Recognition distance:0.3 to 1.8 m。
  • Fast temperature measurement modeDetects face and takes temperature without identity authentication
  • Multiple authentication modes are available: card and temperature, face and temperature, card, and face and temperature, etc
  • Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid
  • Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
  • Displays temperature measurement results on the authentication page Triggers voice prompt when detecting abnormal temperature
  • Configurable door status (open/close) when detecting abnormal temperature
  • Transmits online and offline temperature information to the client software via TCP/IP communication and saves the data on the client software
  • Face recognition duration  <  0.2 s/User; face recognition accuracy rate ≥ 99%
  • 6000 face capacity, 6000 card capacity, and 100,000 event capacity
  • Suggested height for face recognition: between 1.4 m and 1.9 m
  • Supports 6 attendance status, including check in, check out, break in, break out, overtime in, overtime out Watchdog design and tamper function
  • Audio prompt for authentication result
  • NTP, manually time synchronization, and auto synchronization
  • Connects to external access controller or Wiegand card reader via Wiegand protocol
  • Connects to secure door control unit via RS-485 protocol to avoid the door opening when the terminal is destroyed Imports and export data to the device from the client software
  • Biometric recognition products are not 100% applicable to anti-spoofing If you require a higher security level, use multiple authentication modes.
  • In order to get an accurate temperature, after the device is powered on, you should wait for 90 min to warm the device
  • Video intercom setting with MT-01

Product Information

Model   Comeo FTC-06
Temperature Measurement  Temperature range 30 °C to 45 °C (86 °F to 113 °F)
Sensor Vanadium Oxide uncooled sensor
Resolution 120 × 160
Frame rate 25 fps
Measurement accuracy 0.1 °C
Measurement deviation ± 0.5 °C, without black body calibration 
Measuring distance 0.3 to 1.8 m
Screen Size 7-inch
Type Touch screen
Camera Pixel 2 MP
Lens Dual-lens
Network Wired network Support, 10/100/1000 Mbps self-adaptive
Interface Network interface 1
RS-485 1
Wiegand 1
Lock output 1
Exit button 1
Door contact input 1
IO input 2
IO output 1
Capacity Card capacity 6000
Face capacity 6000
Event capacity 100,000
Authentication Card type Mifare 1 card
Card reading distance 0 to 5 cm
Card reading duration <  1 s
Face recognition duration <  0.2 s per person
Face recognition distance 0.3 to 1.8 m Function
Face anti-spoofing Support
Live view Support
Audio prompt Support
Others Power supply 12 VDC/2 A
Working temperature 0 °C to 50 °C (32 °F to 122 °F)
for temperature measurement:  10 °C to 35 °C (50 °F to 95 °F)
Working humidity 10 to 90% (No condensing)
Application environment Indoor and windless environment use only